Kunde erfaringer TIC

Customer feedback: 

"Hello Sir,
I have gathered some information and pics. from our previous order regarding the:

Svedala Jawmaster 1206 HD
400.0484-002 Jaw Plate 2 pcs. Mn22%Cr2%Mo0.5% TIC Insert

Briefly, this test was quite successful. The jaw plates performed well and the operation time was twice as good as their normal ones: 29 000 t and 53 000 t. The wear was even and the jaw plates could run to the end of the wear limits. From the material technology point of view I think this is a good set up for these circumstances.

Svedala Cone crusher CH440
442.9073-03 Mantle Alloy Steel With Tic Insert
442.8419-03 Concave Alloy Steel With Tic Insert

This test started very promising since the wear of these parts was only a. 3 mm/week compared to the wear normally 7 mm/week. 

Customer feedback:

Crusher Type: SADNVIK Cone Crusher CH880 / CH895

OEM: Mantle EF 452.0264-001 and Concave EF 452.0263-001

Location in the crushing line: There are 4 stages in the crusher line and this crusher is used in the 4. stage in other words in the "fine end". 

Increase operation life with 2 - 2,5 times

Customer feedback: 

C160 Jaw Plate One Piece design or 2 Piece Design

Here is the C160 Jaw Plate (Mn22%Cr2% with TIC Insert.

Customized TIC Insert Jaw Plate has a service life of 2 to 3 times that of Mn18%Cr2%. Customers are very satisfied with BOGVIK parts because our products are unique.

When we started the feed to the jaw, the rocks just sat in there and bounced around. Didn't go through. Just bounced up and down.

It did this for about a day, and then has worked perfectly ever since.

Still performing!